Switch Pro Controller Test
Check a Nintendo Switch Pro Controller on your computer or phone. Every button lights up with its Nintendo name (A, B, X, Y, L, R, ZL, ZR, −, +, Home), and both sticks get a drift check.
Live controller tester
Connect your controller and press any button
Plug it in with a USB cable or pair it over Bluetooth, then press a button. For privacy, browsers only show a controller after you press something.
Works with PS5, PS4, Xbox, Switch Pro and most PC gamepads. Nothing is installed or uploaded.
Xbox layout
Sticks
Vibration
Raw values for every button and axis
How to connect a Switch Pro Controller
- With a cable: connect it with a USB-C cable that carries data.
- With Bluetooth: hold the small sync button on the top next to the USB-C port until the lights run back and forth, then add "Pro Controller" in your Bluetooth settings.
- Press any button so the tester picks it up.
Good to know
- Nintendo puts A on the right and B at the bottom, the opposite of Xbox. The diagram uses Nintendo names so the positions match your controller.
- ZL and ZR are digital buttons on the Pro Controller, so their bars jump straight from 0 to 100%. That is normal.
- Some browsers report the Pro Controller with a non-standard layout. If that happens, the raw table shows which number each button sends.
Frequently asked questions
Can I test Joy-Cons here?
Joy-Cons connected over Bluetooth usually show up as separate controllers, and their layout differs between browsers. Use the raw table to see what each press sends.
Why do ZL and ZR only show 0 or 100%?
On the Switch Pro Controller, ZL and ZR are on/off buttons, not analog triggers, so there is nothing in between.
Why does the tester not see my controller?
Press a button first: browsers only reveal a controller after a button press. If it still does not appear, try another USB cable (some cables only charge), re-pair it over Bluetooth, close apps such as Steam that may take over the controller, or try Chrome or Edge.
Is anything installed or recorded?
No. The page reads the controller through the Gamepad API that is built into your browser. Everything runs on your device and nothing is uploaded.
Last updated: November 18, 2026