Stick Drift Test
Stick drift is when a joystick reports movement while nobody touches it. Connect your controller, press a button, let go of both sticks and press Measure stick drift. You get a clear result for each stick in three seconds.
Live controller tester
Connect your controller and press any button
Plug it in with a USB cable or pair it over Bluetooth, then press a button. For privacy, browsers only show a controller after you press something.
Works with PS5, PS4, Xbox, Switch Pro and most PC gamepads. Nothing is installed or uploaded.
Xbox layout
Sticks
Vibration
Raw values for every button and axis
How to run the drift test
- Connect the controller and press any button so the tester sees it.
- Put it on a table. Do not touch the sticks.
- Press "Measure stick drift". For three seconds the tester records how far each stick sits from the centre.
- Read the verdict. You get a result for the left and the right stick separately.
How to read the result
| Resting value | What it means |
|---|---|
| Below 0.05 | Clean. The stick returns to centre properly. |
| 0.05 to 0.12 | A small offset. Most games ignore it because of their built-in deadzone. |
| Above 0.12 | Likely drift. The camera or character may move by itself in games with a small deadzone. |
These limits are a practical guide, not an official standard. A value of 1.000 is the stick pushed all the way to the edge.
Also watch the stick circles. The small dashed ring in the middle shows a 0.10 deadzone. If the dot rests outside that ring, many games will treat it as movement.
What causes stick drift?
Most controller sticks measure their position with small sensors that wear down over time. Dust and dirt can also get inside the stick. Both make the stick report a position that is slightly off centre even when it is at rest. Heavy use speeds this up, which is why drift often shows up after a year or two.
What can I do about drift?
- Clean around the stick. Push the stick to one side and blow compressed air into the gap, then rotate it a few times.
- Calibrate it. On Windows, search for "Set up USB game controllers", open Properties and calibrate. Some consoles and apps such as Steam also have calibration settings.
- Raise the deadzone. Many games let you set a larger stick deadzone, which hides small drift.
- Check your warranty. Drift on a fairly new controller is often covered by the manufacturer.
- Replace or repair the stick. Replacement sticks and controllers with Hall effect sticks, which use magnets instead of rubbing contacts, are less prone to drift.
Check how round the stick range is
Press Start circularity test and slowly roll each stick around its outer edge. The pink outline shows the range the stick actually reaches. A low average error means the stick reaches the edge evenly in every direction. Many controllers reach a little past the circle at the diagonals, so a few percent is normal.
Frequently asked questions
What is stick drift?
Stick drift is when a joystick sends movement to the console or computer without being touched, so your character or camera moves on its own. It is usually caused by wear or dirt inside the stick.
How do I know if my controller has drift?
Let go of the sticks and measure them with the test above. If a stick rests above about 0.12 from the centre, you are likely to notice drift in games.
Can stick drift be fixed?
Sometimes. Cleaning with compressed air and calibrating can help with mild drift. A larger in-game deadzone hides it. Severe drift usually needs a replacement stick, a repair or a new controller.
Is a small value like 0.02 normal?
Yes. No stick rests at exactly zero. Small values like 0.01 to 0.04 are normal and are hidden by every game's deadzone.
Why does the tester not see my controller?
Press a button first: browsers only reveal a controller after a button press. If it still does not appear, try another USB cable (some cables only charge), re-pair it over Bluetooth, close apps such as Steam that may take over the controller, or try Chrome or Edge.
Last updated: November 18, 2026